N06625 Incoloy 625 Tubería de acero con base de níquel
Información básica
Modelo: N06625 Incoloy 625
Descripción del producto
Element | Content |
Ni | 58% min |
Cr | 20 - 23% |
Mo | 8 - 10% |
Nb+Ta | 3.15 - 4.15% |
Fe | 5% max |
Property | Metric | Imperial |
Density | 8.44 g/cm3 | 0.305 lb/in3 |
Melting point | 1350 °C | 2460 °F |
Co-Efficient of Expansion | 12.8 μm/m.°C (20-100°C) | 7.1x10-6 in/in.°F (70-212°F) |
Modulus of rigidity | 79 kN/mm2 | 11458 ksi |
Modulus of elasticity | 205.8 kN/mm2 | 29849 ksi |
Condition of Supply | Heat Treatment (After Forming) | |||
Annealed/Spring Temper | Stress relieve at 260 - 370°C (500 - 700°F) for 30 - 60 minutes and air cool. | |||
Condition | Approx Tensile Strength | Approx Service Temp. | ||
Annealed | 800 - 1000 N/mm2 | 116 - 145 ksi | -200 to +340°C | -330 to +645°F |
Spring Temper | 1300 - 1600 N/mm2 | 189 - 232 ksi | up to +200°C | up to +395°F |
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000,1219,1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B,2E |
Plate | Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B,2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle,Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | Use for PHE |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | Use for PHE |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Forged piece | roundness and square alloy | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.90mm/1.2mm/1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm | |||
Welding rodΦ2.4mm/3.2mm/4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Grupos de Producto : Acero inoxidable > Tubería de acero inoxidable
Premium Related Products